Step 2: Chargingthe Battery Pack - Sony Handycam DCR-SR42 Operating Manual

Step 2: Chargingthe battery pack
You can charge the "InfoLITHIUM"
battery pack (H series) after attaching
it to your camcorder.
• Your Call/corder operates ollly "_vJtll all
"lnloLITHIUM" battery pack (H series).
4
/ Attach the battery pack by sliding
it in the direction of the arrow until
it clicks.
2
Turn the POWER switch in the
direction ofthearrowto OFF(CHG)
(The default setting).
3
Connect the AC Adaptor to the DC
IN jack on the Handycam Station.
Be sure Ihal the • mark on Ihe DC plug
is facing up.
4
Connect the power cord to the AC
Adaptor and the wall outlet.
To the
wall outlet
Power cord
5 Set the camcorder onto the
Handycam Station securely.
The CHG (charge) lamp lights up and
charging starts. The CHG (charge) lamp
turns off when the battery pack is fully
charged. Remove the camcorder from the
Haudycam Statiuu.
To remove the battery pack
Turn the POWER switch to OFF (CHC).
Slide the BATT (battery) release lever and
remuve the battery pack.
• When you remove the battery pack or the AC
Adaptor. make sure thal the _ (Movie) lamp/
(Still) lamp/p-13) is lurned oil.
11