Advertisement
When the footswitch is pressed, the two amplifiers, A and B,
are toggled one after the other. Additionally, you can switch
them remotely from your MIDI controller.
Power-on sequence:
1. Power the Two Amps To Cabinet switcher.
2. Turn on the amplifiers.
3. Test each amplifier and cabinet with reduced volume.
Power-off sequence:
1. Turn off the amplifiers.
2. Power off the Two Amps To Cabinet switcher.
The Two Amps to a Cabinet switcher receives MIDI data and
saves it to a given preset. Unlike many other MIDI devices,
when using this device, you do not need to understand how
MIDI works. MIDI programming itself is very quick and easy.
EXT. CONTROL
A
ACTIVE AMP
MIDI
LEARN
HOLD FOR MIDI LEARN
AMP SELECTOR
Simply press and hold the footswitch until the MIDI Learn
LED turns on. Keep in mind that the active amplifier will change.
Then send a MIDI message from your controller. The MIDI
Learn LED will turn off and you are done! You have already
programmed one preset. Repeat the same process for the next
amplifier. If you have pressed and held the footswitch, enabling
MIDI programming mode, and you want to exit that mode,
simply press the footswitch once.
Power On/Off sequences
MIDI Programming
B
Press
and hold
Send MIDI
message
MIDI Controller
EXT. CONTROL
A
B
ACTIVE AMP
MIDI
LEARN
HOLD FOR MIDI LEARN
AMP SELECTOR
Advertisement
