Advertisement
4. Footswitch for toggling between the amplifiers.
5. MIDI Learn LED – Stays on when programming or flashes
when the unit receives MIDI messages.
6. Active Amp LEDs – Indicate the activated amplifier (or
cabinet when using one amplifier for two cabinets).
EXT. CONTROL
A
MIDI
LEARN
HOLD FOR MIDI LEARN
AMP SELECTOR
Relay unit:
1. Guitar Input – Plug your guitar here.
2. To input Amp A and B jack plugs for connecting to the
inputs of your amplifiers, where you would normally plug in
your guitar.
3. External control inputs – Use a mono jack to connect the
relay unit to the footcontroller.
4. Speaker Out Amp A and B jack plugs for connecting the
speaker outputs from your amplifiers, where you would
normally plug in your cabinet.
5. Speaker Cabinet – Plug your speaker cabinet here when
playing with two amps to one cabinet.
B
ACTIVE AMP
Amp type selector
Advertisement
