Table of Contents
Advertisement
to the device. Only devices that support CEC Remote
Control function will respond to the TV remote control.
The TV supports also eARC (Enhanced Audio Return
Channel) feature. Similar to ARC, the eARC feature
enables the transfer of the digital audio stream from
your TV to a connected audio device via the HDMI
cable. eARC is an improved version of ARC. It has
a much higher bandwidth than its predecessor.
Bandwidth represents the range of frequencies or
amount of data that is being transferred at a time.
Higher bandwidth translates into a higher amount of
data that can be transferred. Higher bandwidth also
means that digital audio signal doesn't have to be
compressed and is much more detailed, rich, and
vibrant.
When eARC is enabled from the sound menu, TV
first tries to establish eARC link. If eARC is supported
by the connected device, the output turns into eARC
mode and the "eARC" indicator can be observed on
the connected device's OSD. If an eARC link cannot
be established (for example, the connected device
is not supporting eARC but supporting ARC only) or
if eARC is disabled from the sound menu, then TV
initiates ARC.
In order to activate ARC feature the eARC option
should be set as Auto. You can access this option
from the TV options>Sound menu in Live TV mode or
from the Settings>Display & Sound>Sound menu on
the Dashboard. When eARC is active, TV will mute its
other audio outputs automatically. So you will hear
audio from the connected audio device only. The
volume control buttons of the remote will be directed
to the connected audio device and you will be able to
control the volume of the connected device with your
TV remote.
For eARC to function properly;
• The connected audio device should also support
eARC.
• Some HDMI cables do not have enough bandwidth
to carry high-bit-rate audio channels, use an HDMI
cable with eARC support (HDMI High Speed Cables
with Ethernet and the new Ultra High Speed HDMI
Cable - check hdmi.org for latest info).
Note: eARC is supported only via the HDMI2 input.
Google Cast
With the built-in Google Cast technology you can cast
the content from your mobile device straight to your
TV. If your mobile device has Google Cast feature, you
can mirror your device's screen to your TV wirelessly.
Select Cast screen option on your android device.
Available devices will be detected and listed. Select
your TV from the list and tap on it to start casting.
You can get the network name of your TV from the
Settings>System>About menu on the Dashboard.
Device name will be one of the shown options. You
can also change the name of your TV. Highlight Device
name and press OK. Then highlight Change and press
OK again. You can either select one of the predefined
names or enter a custom name.
To cast your device's screen to the TV screen...
1.
On your android device, go to 'Settings' from the
notification panel or home screen
2.
Tap on 'Device Connectivity'
3.
Tap on the 'Easy projection' and enable 'Wireless
projection'. Available devices will be listed
4.
Select the TV you would like to cast to
1.
Slide down the notification panel
2.
Tap on 'Wireless projection'
3.
Select the TV you would like to cast to
If the mobile app is Cast-enabled, such as YouTube,
Dailymotion, Netflix, you can cast your app to your TV.
On the mobile app, look for the Google Cast icon and
tap on it. Available devices will be detected and listed.
Select your TV from the list and tap on it to start casting.
To cast an app to the TV screen...
1.
On your smartphone or tablet, open an app that
supports Google Cast
2.
Tap the Google Cast icon
3.
Select the TV you would like to cast to
4.
The app you selected should start playing on TV
Notes:
Google Cast works on Android and iOS. Make sure that your
mobile device is connected to the same network as your TV.
The menu options and namings for Google Cast function on
your Android device can differ from brand to brand and can
change with time. Refer to your device's manual for latest
information on Google Cast function.
HBBTV System
HbbTV (Hybrid Broadcast Broadband TV) is a standard
that seamlessly combines TV services delivered via
broadcast with services delivered via broadband and
also enables access to the Internet only services for
consumers using connected TVs and set-top boxes.
Services delivered through HbbTV include traditional
broadcast TV channels, catch-up services, video on
demand, electronic programme guide, interactive
advertising, personalisation, voting, games, social
networking and other multimedia applications.
HbbTV applications are available on channels where
they are signalled by the broadcaster.
The HbbTV applications are generally launched with
the press of a coloured button on the remote. Generally
a small red button icon will appear on the screen in
English - 31 -
or
(**) Limited Models Only
Advertisement
Table of Contents
