What to Expect Setting Up and Using Your Infrared PEMF Mat Max What’s In the Box? Controller Configuration How to Operate Your Infrared PEMF Mat Max Activating PEMF Settings Activating Red Light Therapy Activating FAR Infrared Light (Heat) Setting the Timer...
Welcome Congratulations on receiving your very own BON CHARGE Infrared PEMF Mat Max. Before using your Infrared PEMF Mat Max please read this User Manual in detail. The Infrared PEMF Mat Max has been designed with your safety in mind.
Usage Instructions You should lay your Infrared PEMF Mat Max on a stable surface prior to use. You can wear clothes or no clothes during a session, it’s completely your choice. When using the Red and Near Infrared Light settings we would recommend the least amount of clothes possible for maximum benefits.
What to Expect Depending on which settings you use you can enjoy the following benefits, when used consistently. Function Benefits Level 1 (3Hz) – Delta waves Improves deep sleep Level 2 (7.8Hz) – Schumann Resonance Grounding effect Level 3 (10Hz) – Alpha waves Increase calmness and creativity Level 4 (25Hz) –...
What’s in the Box? 1 x Infrared PEMF Mat Max 1 x Carry Bag 1 x Power Cable + Controller Controller Configuration 1. Power Switch (on/off) 2. QR Code for user manual 3. PEMF Button (on/off/levels) 4. Near Infrared (850nm) and Red Light (660nm) 5.
How To Operate Your Infrared PEMF Mat Max Step 1 Remove all components from the box. Lay the Infrared PEMF Mat Max on the floor or other stable surface and connect the Power Cable/Controller to the mat. When connecting your PEMF Mat Max to the controller, please ensure that you press the 2 pins in and direct your controller into the PEMF Mat in a straight line.
Page 9
Step 2 Plug the other end of the Power Cable/Controller into an appropriate power outlet. Step 3 Turn on the device by pressing and holding the power button until the controller activates (to turn off the device press and hold the power button a further time until controller turns off)
Activating PEMF Settings Click the icon to toggle through the pre-set PEMF settings. Once you have chosen your setting from the options the PEMF will be activated on the device Note: PEMF setting will turn off automatically after 20 minutes PEMF settings are as follows: P1 (3Hz) –...
Activating FAR Infrared Light (Heat) FAR Infrared Light is controlled by the section. To choose the level of FAR Infrared Light (Heat) press the + button to turn up the heat and the – button to reduce the heat. The heat range is 0-70 degrees centigrade (see conversion chart for Fahrenheit equivalents).
Temperature Conversion Chart °F °C Fahrenheit Centigrade 10 °C 50 °F 15 °C 59 °F 20 °C 68 °F 25 °C 77 °F 30 °C 86 °F 35 °C 95 °F 40 °C 104 °F 45 °C 113 °F 50 °C 122 °F 55 °C 131 °F...
What is PEMF? PEMF (Pulsed Electromagnetic Fields) works by sending beneficial low-level frequencies of energy through your body. PEMF has been shown to improve deep sleep, have a grounding effect, increase calmness and creativity, and help with conscious thought and logical thinking.
What Setting Should I Use? It is best to listen to your body when choosing the best setting to use. As a reminder the settings are below: Level 1 (3Hz) – Delta waves to improve deep sleep. Level 2 (7.8Hz) – Earthing/Grounding – Earth's electromagnetic field (Schumann Resonance) Level 3 (10Hz) –...
Page 17
Specifications Model BON CHARGE Infrared PEMF Mat Max Size 74.8 inches (190cm) x 31.5 inches (80cm) PEMF Settings 5 settings 660nm Red Light Wavelengths 850nm Near Infrared FAR Infrared 48pcs LEDs Voltage AC 110V (USA/Canada) Flicker <0.1% Warranty 1 Year Certification...
• Do not modify or attempt to modify this device. • Do not attempt to repair this device. Cautions BON CHARGE advises that before using your Infrared PEMF Mat Max you must seek professional doctors advice. This includes if: • You are pregnant.
• Do not use your device if damaged, this may result in electric shock or injury. Disclaimer BON CHARGE PEMF Mat is not intended to diagnose, cure, or prevent specific diseases or medical conditions. These products are only intended to be used on mild conditions that have been medically diagnosed.
Warranty and Returns Manufacturer’s Warranty (Infrared PEMF Mat Max) BON CHARGE warrants that this device (Infrared PEMF Mat Max) will function and perform within the specifications for one year from the date of delivery.
Page 21
How long does the cover last? This Manufacture’s Warranty for Infrared PEMF Mat Max purchased from BON CHARGE is valid for one (1) year from date of purchase. A replacement Infrared PEMF Mat Max or part assumes the remaining warranty of the original Infrared PEMF Mat Max.
Page 22
BON CHARGE boncharge.com 2/74 Gordon Road East boncharge_ Osborne Park 6017 boncharge Western Australia Australia...
Page 23
If service is required, the buyer is responsible to return the device to BON CHARGE within the one (1) year warranty period. BON CHARGE reserves the right to provide parts in different colours to the original device. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.