Table of Contents
Advertisement
4-3. TEST MODE 2:
| KV-S341
switch Test Mode 2 off
[03 |Volume35%
[04 [Volume50%
P05 [Volume65%
| 06 | Volume 80%
Aging Condition (Volumin., Picture max., Brightness
max., Aging 2 Mode of CXA 1587S, TDA 2595 is
locked to CXA 1587S via PIN 34 of yx-Con.)
Shipping Condition (Analog Values are RESET due
to factory setting, Prog 1 is selected, TT Mode is
switched o
13-14
Read factory setting from NVM
Reads Volume, Balance, Treble, Bass, Brightness,
Contrast, Hue, Sharpness, Colour values from ROM
to the actual used values
(Last Power Memory
Save actual used values as RESET values
Memorize actual used values Balance, Treble, Bass,
Hue, Sharpness at RESET position in NVM
Preset Lavel for AV Sources
P18 [dummy
[19 [StereoSeperation
| 20 [Tenthentryisdeleted
| 21 |
| 22 |
| 23 |
Sub Colour
[Green
Drive
[BlueDrive
Blue Cut Off (Auto Cut O
Red Cut Off (Manual Cut Off)
Auto Cut Off is switched o
Green Cut Off (Manual Cut Off)
Auto Cut Off is switched o
7 | Blue Cut Off (Manual Cut Off)
Auto Cut Off is switched o
Y-Filter adjustment (Trap is switched off and TDA
9145 is switched in forced NTSC Mode
| 39 | dummy
| 40 | Tenth entry is deleted
Default setting of CXA 1587,5
Only in Plog 99 available
Default setting of CXA 2018
(Only in Plog 99 available)
Default setting of CXA 1526
Only in Plog 99 available
all Port High) Not yet
(all Port High) Not yet
Erease the NVM Testbyte (this byte detects already
stored NMV's) After selecting this function, switch
TV Off and On — the NVM will be preset by p-
Controller. (Not the channel data)
>
>
a COREE
Note:
For No. 35, 36, 37 and 38 special pressing
(AKB, forced Color Mode, Trap) is selected.
After selecting a new Test Mode Number,
the
AKB
is switched
ON,
the Trap
is
switched On and TDA 9145 is switched to
Auto Search Mode.
a
In Test Mode 2 the Menu display is
switchable by Speaker-Off button.
Advertisement
Table of Contents
