Sony TRINITRON KV-S3411A Service Manual page 28

KV-S341 |
(2)Dynamic convergence adjustment
1. Adjust horizontal convergence located at the
center position of the screen with H STAT VR. 3. Select CXA 1526 on menu.
2. Enter into service mode. (Refer to the section 2 4. Select each item and adjust them so that each item
attains optimal convergence.
"Electrical Adjustment" on how to enter service
5. Press button to write the data.
mode.)
CXA 1526
[TtemNo- | Adjustment Rem | Data Amout |
ro jocswrr | a
[0 [upPERvBow | + |
[os [towerveow | 5
[Hames
[os [HTT | 2» |
[06 _[uPPERcORBOW | 32 _|
aneeas
[08 |
a a a
UPPER TILT
LOWER COR BOW
LOWER TILT
R.G.B.dots movement on the screen of the set
DC SHIFT UPPER Y BOW LOWER Y BOW
Fine adjustment of HSTAT Adjustment of Y BOW of the Adjustment of Y BOW of the
upper section of the screen. lower section of the screen.
H AMP H TILT UPPER COR BOW
H AMP adjustment H TILT adjustment Adjustment of C BOW of the
upper section of the screen.
UPPER TILT LOWER COR BOW LOWER TILT
Adjustment of TILT of the Adjustment of C BOW of the Adjustment of TILT of the
upper section of the screen. lower section of the screen. lower section of the screen.
At this time, H.TILT, H.AMP, UPPER TILT, UPPER right and left dots are reverse in all the TILT system.
COR, BOW, LOWER TILT, and LOWER COR, (Pay attention to the dotted lines.)
BOW look like all the same, but the movement of the