Hitachi YUTAKI PC-ARCHE Installation And Operation Manual page 43

5 Confirmation screen:
• ATW-RTU-12 displays the signal strength, and at the top right of the screen, it shows the ID.
"ID 1" indicates that it is the first thermostat linked to the ATW-IOT-01 device, and "ID 2" indicates
that it is the second thermostat linked to the ATW-IOT-01 device.
• Press the " " button to accept the binding. If no button is pressed, the operation is confirmed
automatically after 5 seconds.
• The yellow LED on the ATW-IOT-01 remains lit.

NOTE
• The first binding is saved as Thermostat 1, and the second binding (if necessary) is saved as
Thermostat 2.
• The selection of the zone in which the Room thermostat will be used is made within the Room
thermostat menu on the YUTAKI LCD Controller.
PMEN0651 rev.0 - 10/2023
Linked zone
Signal strength
4
34