1 Thermostat data on the ATW-IOT-01 device is reset as follows:
• "Button 2" is pressed for 15 seconds.
• The yellow LED on ATW-IOT-01 is turned OFF, indicating the successful deletion of all thermostat
data.
2 Resetting ATW-RTU-12:
• Ensure that the "bind" text is displayed at the top right of ATW-RTU-12. If it is displayed, proceed
to the next step.
• In case the "bind" text is not displayed, a factory reset of the thermostat is performed using
optional function 12 as explained in
using optional function 11 as explained in
Please note that optional function 11 solely clears binding parameters while retaining the rest
of the parameters if they are already configured.
PMEN0651 rev.0 - 10/2023
Button 2
(15 seconds)
Yellow LED
turns OFF
"4.3.11 Factory
reset", or the binding parameters are reset
"4.3.12 Clear
binding".
4
32