Names And Functions Of Parts - Yamaha DP100 Operation Manual

NAMES AND FUNCTIONS OF PARTS
REDUCTION
-1
C -3
Os
GATE THRESHOLD OUTPUT
G
NL:
© Power switch (POWER) and indicator
When the POWER switch is ON ( ==-) the ON indicator lights up.
Ө Reduction indicators (REDUCTION)
When the limiter circuit is activated these 5 LEDs display the reduction level for
the input signals.
@ Gate level control (GATE)
This control determines the gate level for the noise gate circuit. Sometimes dis-
turbing noise and hum is generated when there is no input signal. To limit this
noise set the gate level for the noise gate circuit with this control in order to shut
off input signals below this level (noise gate closed). Signals above the set gate
level, however, will be output (gate open).
Input signal |
When passing
{ through the noise \
d
gate circuit ... d
0
т
Су
š
©
ри | ра |
^^ Gate level set with
а GATE control
TIME —
Gate Gate Gate Gate Il G)