Clas Ohlson WTG-043 Quick Start Manual

Emergency light torch
Art.no 31-2956 Model WTG-043
Please read the entire instruction manual before using the product
and then save it for future reference. We reserve the right for
any errors in text or images and any necessary changes made
to technical data. In the event of technical problems or other
queries, please contact our Customer Services.
Buttons and functions
1
2
3
1. [ M ] Torch intensity
2. [ ON/OFF ] On/off switch
3. Light Sensor
4. Charger cradle
5. Night light
Operating instructions
• Connect the charger cradle to a power point.
Insert the torch and let it charge for 15 hours before using
it for the first time.
• The torch is designed for continuous charging. The charge
cradle transitions into maintenance charging once
the batteries are fully charged.
• The torch comes on and stays lit for about 20 sec when its
charge cradle is first connected to a power point.
Torch
1. Remove the torch from its charge cradle and turn it on
using the [ ON/OFF ] switch.
2. Set the desired beam intensity by pressing [ M ] repeatedly
until the desired beam intensity is reached.
Night light
The night light comes on automatically whenever
the surroundings become dark (under 10 lux).
4
Power cuts
The torch comes on automatically whenever there is a power
cut, provided that it is sitting in the charge cradle and the cradle
is connected to a functioning wall socket.
Care and maintenance
5
Clean the torch using a lightly moistened cloth. Use only mild
cleaning agents, never solvents or corrosive chemicals.
Battery
The battery is not replaceable. When it stops working
the product must be discarded.
Disposal
This symbol indicates that this product should
not be disposed of with general household
waste. This applies throughout the entire EU. In
order to prevent any harm to the environment
or health hazards caused by incorrect waste
disposal, the product must be handed in for
recycling so that the material can be disposed
of in a responsible manner. When recycling
the product, take it to your local collection facility or contact
the place of purchase. They will ensure that the product is
disposed of in an environmentally sound manner.
Specifications
230 V, 50 Hz
Rated voltage
Battery 1 × 3.7 V 250 mAh lithium polymer
Torch bulb 1 × LED 1 W, 300 mA
Night light bulb 3 × LED 0.1 W, 20 mA
Run time at full charge 1 hour
Charging time 15 hours
English