Cooking Table; Power Management Function - Frank FMY 805 I F KL BK User Manual

Table of Contents

Advertisement

AUTO function

10. COOKING TABLE

Power level
Cooking method
1
Melting, heating gently
2
Melting, heating gently
3
Warming up
4
Prolonged cooking, thickening, stewing
5
Prolonged cooking, thickening, stewing
6
Prolonged cooking, braising
7
Light frying
8
Frying, deep fat frying
9
Quick frying at high temperature
P
Quick heating
11. POWER MANAGEMENT
FUNCTION
"This product is equipped with electron-
ically controlled power management.
See the illustration.
This function controls the maximum
power delivery of 3700 W between the
cooking zones used in combined mode
(1+2 and 3+4), optimising power distri-
bution and avoiding system overload
situations.
Hob in full power setting - the function di-
vides the power between cooking areas
and automatically decreases the power
12
This function allows you to enable AUTO mode so that operation of the hob and hood are coordin-
ated. When the hob is switched on, the lights are also switched on. The hood speed is automatic-
ally set using the highest power level present on the hob.
Hob-Hood Coupling
With the hob off, simultaneously press "+" and "-" and the coupling procedure will be activated and
an animation will appear on the display.
WARNING: once the procedure has been activated, refer to the hood manual and check that the K-
Link Coupling procedure has been activated. The coupling procedure takes 2 minutes.
Press "+" and "-" again to confirm.
Hob-Hood Decoupling
With the hob off, press "-" for 2 seconds. An animation will confirm the operation.
To be used for
Butter, chocolate, gelatine, sauces
Butter, chocolate, gelatine, sauces
Rice
Vegetables, potatoes, sauces, fruit, fish
Vegetables, potatoes, sauces, fruit, fish
Pasta, soups, braised meat
Rösti (potato fry-ups), omelettes, breaded and fried
foods, sausages
Meat, chips
Steak
Boiling water
of the other cooking area, if necessary
(the last command has highest priority).
Hob in power limitation setting - the func-
tion divides the power between cooking
areas and does not allow you to set the
power for the other cooking area above
the limit (to increase the power of a par-
ticular cooking area, the power setting
for the other one must be decreased
manually).
Example:
If boost level (P) is selected for hob 1,
hob 2 cannot exceed level 9 at the same
time and will be automatically limited."
12. GUIDE TO PAN USE
Which pans to use
Only use pots and pans with the bottom
made from ferromagnetic material which
are suitable for use with inductions hobs:
• cast iron
• enamelled steel
• carbon steel
• stainless steel (including partial)
• aluminium with ferromagnetic coating
or ferromagnetic plate

Advertisement

Table of Contents
loading

Table of Contents