Advertisement
AIWA
MODEL
AD-1800EE,UK
10.
To Remove Switch/Volume Circuit Board
(1)
Remove sixteen screw, (1) through (16).
(Refer to Fig. 7)
11.
To Remove LAMP Circuit Board
(1)
Remove one screw, (1).
(Refer to Fig. 8)
12.
To Remove Meter Circuit Board
(1)
Remove two screws, (2) and (3).
(Refer to Fig. 8)
13.
To Remove Bias Osc Circuit Board
(1)
Remove two screws, (4) and (5).
(Refer to Fig. 8)
15.
To Remove
LED Circuit Board
(1)
Remove two screws, (1) and (2).
(Refer to Fig. 10)
16.
To Remove
Counter
Lamp Circuit Board
(1)
Remove
four screws, (1) through (4).
(Refer to Fig. 11)
< Fig. 11 >
17.
To Remove
Motor Circuit Board
(1)
Remove two screws, (1) and (2).
(Refer to Fig. 12)
18.
To Remove Jack-2 Circuit Board
(1)
Remove the nut and washer (1).
(2)
Remove six screws, (2) through (7).
(Refer to Fig. 13)
Advertisement
