Canon ADVANCED EOS IX 7 Instructions Manual page 25

Removing the Film
When you get to the end of a roll of film, your camera will rewind it
automatically. During rewinding, the LCD panel shows the @ss indicator,
and the number in the frame counter counts backwards. When the @
indicator flashes and the frame counter shows 0, you can remove the film.
Make sure the Q indicator is
flashing in the LCD panel.
*The @ indicator flashes for
approximately four seconds, then
remains lit steadily.
Open the film compartment cover.
*Raise the cartridge film compartment
cover latch and turn it to the right to
open the cover.
Remove the film.
*The @ indicator in the LCD panel
then goes out.
Dg]; "Seems hes fin cater, sry arar ch Sa ito
'open the film compartment cover, the message "CLOSE" appears in the LCD panel, and
you will hear a warning tone. Immediately return the fim compartment cover latch to its
regular position.
= To rewind the film in midroll, press the uss (fiim rewind) button (— 75).
@ "ithe ss indicator and frame counter in the LCD panel flash during rewinding,
'something has gone wrong with the rewinding operation. Try removing and replacing the
battery, then pressing the film rewind button again. If the camera still does not operate, set
the main switch to (M and take the camera to the nearest Canon Service Center.
25