Table of Contents
Advertisement
Right-Hand Air Discharge
For horizontal right-hand air discharge, the following field
modifications are required.
1. Remove and set aside blower and coil access panels.
2.
Remove brackets securing pan to unit. See figure 4.
Page 6 of 22
Figure 4
3.
Remove coil assembly, bottom drain pan and
horizontal drain pan as one unit from the air handler.
See figure 5.
4.
Remove the blow-off prevention brackets, top cap and
drip pan between slabs. Move the horizontal drain pan
to the opposite side of the coil. See figure 6.
NOTE: The 2-ton unit does not have or require blow-off
prevention brackets or drip pan.
Issue 1810
Figure 5
Figure 6
507623-02
Advertisement
Table of Contents
