Safety And Instructional Decals - Toro Z Master Professional 5000 Series Operator's Manual

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. Grease
1. Warning—read the Operator's Manual for instructions on
torquing the blade bolt/nut to 115 to 149 N∙m (85 to 110
ft-lb).
1. Machine speed
2. Fast
3. Slow
58-6520
93-7818
99-8936
4. Neutral
5. Reverse
decal58-6520
1. Warning—do not touch the hot surface.
decal93-7818
decal99-8936
1. Warning—there is no rollover protection when the roll bar is
down.
2. To avoid injury or death from a rollover accident, keep the
roll bar in the fully raised and locked position and wear
the seat belt. Lower the roll bar only when absolutely
necessary; do not wear the the seat belt when the roll bar is
down.
3. Read the Operator's Manual; drive slowly and carefully.
6
106-5517
107-3069
decal106-5517
decal107-3069