1. Manuals
  2. Brands
  3. TBK vision Manuals
  4. Network Hardware
  5. TBK-NVR2204
  6. Quick start manual

TBK vision TBK-NVR2204 Quick Start Manual

Hide thumbs Also See for TBK-NVR2204:
Table of Contents

Advertisement

Quick Links

Download this manual
Quick Start Guide
Network Video Recorder
TBK-NVR2200 series

Advertisement

Table of Contents
loading

Related Manuals for TBK vision TBK-NVR2204

Summary of Contents for TBK vision TBK-NVR2204

  • Page 1 Quick Start Guide Network Video Recorder TBK-NVR2200 series...

  • Page 2: Table Of Contents

    This user manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of TBK Vision. Unless otherwise stipulated, TBK Vision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual.
  • Page 3 TBK-NVR2200 Network Video Recorder Quick Start Guide HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON- INFRINGEMENT OF THIRD PARTY.
  • Page 4 Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements. Applicable Models This manual is applicable to the models listed in the following table. Series Model TBK-NVR2204 TBK-NVR2208 TBK-NVR2200 TBK-NVR2208-8P TBK-NVR2216 Symbol Conventions The symbols that may be found in this document are defined as follows.
  • Page 5 TBK-NVR2200 Network Video Recorder Quick Start Guide Safety Instructions ⚫ Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. ⚫ In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.
  • Page 6 TBK-NVR2200 Network Video Recorder Quick Start Guide ⚫ When installing the device into a cabinet over 2U height, it is suggest to use rack shelf to bear the weight. If the cabinet height is over 4U, it is suggested to use slide rails or rack shelf to bear the weight.

  • Page 7: Chapter 1 Panels Description

    TBK-NVR2200 Network Video Recorder Quick Start Guide Chapter 1 Panels Description 1.1 Front Panel Table 1-1 Description of Front Panel No. Name Function Description Turns green when the power switch on the rear panel is POWER turned on. Flickers red when data is being read from or written to STATUS HDD.

  • Page 8: Rear Panel

    TBK-NVR2200 Network Video Recorder Quick Start Guide 1.2 Rear Panel TBK-NVR2204, TBK-NVR2208, TBK-NVR2216 Figure 1-1 TBK-NVR2204, TBK-NVR2208, TBK-NVR2216 Table 1-2 Panel Description Item Description Power Supply 12 VDC power supply. Audio In RCA connector for audio input. HDMI Interface HDMI video output connector.

  • Page 9: Tbk-Nvr2208-8P

    TBK-NVR2200 Network Video Recorder Quick Start Guide TBK-NVR2208-8P Figure 1-2 TBK-NVR2208-8P Table 1-3 Panel Description Item Description Power Supply 100~240 VAC power supply. Audio In RCA connector for audio input. HDMI Interface HDMI video output connector. LAN Network Interface 1, 10 /100 /1000 Mbps self-adaptive Ethernet interface Audio Out RCA connector for audio output.

  • Page 10: Chapter 2 Installation And Connections

    TBK-NVR2200 Network Video Recorder Quick Start Guide Chapter 2 Installation and Connections 2.1 NVR Installation During installation of the NVR: ⚫ Use brackets for rack mounting. ⚫ Ensure ample room for audio and video cables. ⚫ When routing cables, ensure that the bend radius of the cables are no less than five times than its diameter.
  • Page 11 TBK-NVR2200 Network Video Recorder Quick Start Guide Figure 2-2 Connect Data Cable Step 3 Connect the power cable to the HDD. Figure 2-3 Connect Power Cable Step 4 Place the HDD on the bottom of the device and then fasten the screws on the bottom to fix the HDD.

  • Page 12: Hdd Storage Calculation Chart

    TBK-NVR2200 Network Video Recorder Quick Start Guide 2.3 HDD Storage Calculation Chart The following chart shows an estimation of storage space used based on recording at one channel for an hour at a fixed bit rate. Bit Rate Storage Used 128K 160K 192K...
  • Page 13 TBK-NVR2200 Network Video Recorder Quick Start Guide 8192K 3.6G 16384K 7.2G Please note that supplied values for storage space used is just for reference. The storage values in the chart are estimated by formulas and may have some deviation from actual value. www.tbkvision.com...

  • Page 14: Chapter 3 Menu Operation

    TBK-NVR2200 Network Video Recorder Quick Start Guide Chapter 3 Menu Operation 3.1 Menu Structure Refer to the following figure for the menu structure: Figure 3-1 Menu Structure The menu structure may vary according to different models. 3.2 Startup and Shutdown Proper startup and shutdown procedures are crucial to expanding the life of the NVR.

  • Page 15: Activating Your Device

    TBK-NVR2200 Network Video Recorder Quick Start Guide Step 2 Press the POWER button on the front panel. The Power LED should turn blue. The unit will begin to start. After the device starts up, the wizard will guide you through the initial settings, including modifying password, date and time settings, network settings, HDD initializing, and recording.
  • Page 16 TBK-NVR2200 Network Video Recorder Quick Start Guide Figure 3-3 Set Admin Password STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product.

  • Page 17: Using The Unlock Pattern For Login

    TBK-NVR2200 Network Video Recorder Quick Start Guide 3.4 Using the Unlock Pattern for Login For the Admin user, you can configure the unlock pattern for device login. After the device is activated, you can enter the following interface to configure the device unlock pattern.

  • Page 18: User Login

    TBK-NVR2200 Network Video Recorder Quick Start Guide 3.5 User Login Purpose: If NVR has logged out, you must login the device before operating the menu and other functions. Step 1 Select the User Name in the dropdown list. Figure 3-7 Login Step 2 Input Password.

  • Page 19: Network Settings

    TBK-NVR2200 Network Video Recorder Quick Start Guide 3.7 Network Settings Purpose: Network settings must be properly configured before you operate NVR over network. Step 1 Enter the Network Settings interface. Menu > Configuration > Network Figure 3-9 Network Settings Step 2 Select the General tab. Step 3 In the General Settings interface, you can configure the following settings: NIC Type, IPv4 Address, IPv4 Gateway, MTU and DNS Server.

  • Page 20: Live View

    TBK-NVR2200 Network Video Recorder Quick Start Guide You can select one of the following three options to add the IP camera. ⚫ OPTION 1: Step 1 Click to select an idle window in the live view mode. Step 2 Click the icon in the center of the window to pop up the Add IP Camera interface.

  • Page 21: Recording Settings

    TBK-NVR2200 Network Video Recorder Quick Start Guide 3.10 Recording Settings Before you start: Make sure that the disk has already been installed. If not, please install a disk and initialize it. You may refer to the user manual for detailed information. Purpose: Two kinds of record types are introduced in the following section, including Instant Record and All- day Record.

  • Page 22: Playback

    TBK-NVR2200 Network Video Recorder Quick Start Guide 3.11 Playback The recorded video files on the hard disk can be played back in the following modes: instant playback, all-day playback for the specified channel, and playback by normal/event/smart/tag/sub- periods/external file search. Step 1 Enter playback interface.

  • Page 23: Chapter 4 Accessing By Web Browser

    TBK-NVR2200 Network Video Recorder Quick Start Guide Chapter 4 Accessing by Web Browser You shall acknowledge that the use of the product with Internet access might be under network security risks. For avoidance of any network attacks and information leakage, please strengthen your own protection.
  • Page 24 TBK-NVR2200 Network Video Recorder Quick Start Guide ⚫ If the device is already activated, enter the user name and password in the login interface, and click the Login button. Figure 4-2 Login Step 3 Install the plug-in before viewing the live video and managing the camera. Please follow the installation prompts to install the plug-in.

This manual is also suitable for:

Tbk-nvr2200 seriesTbk-nvr2208Tbk-nvr2208-8pTbk-nvr2216

Table of Contents