Direct) - Sony HT-SF2000 Operating Instructions Manual

Tip
Sun'ound speaker position is designed specifically
for implementation of the (INEMA STUDIO EX
modes. For other sound fields, speaker position is
not so critical.
Those sound fields were designed m_der the premise
that the surround speakers would be located behind
the listening position, but presentation remains
fairly consistent even with the surround speakers
positioned at a rather wide angle. However, if the
speakers are pointing toward the listener from the
immediate left and right of the listening position, the
sm'round effects become unclear unless set to
"SIDE/LO" or "SIDE/HI".
Nevertheless. each listening environment has many
variables, such as wall reflections, and you may
obtain better results using "BEHD/HI" if your
speakers are located high above the listening
position, even if they are located to the immediate
left and right.
Therefore, although it may result in a setting
contral 7 to the above explanation, we recommend
that you playback multi chalmel sar'round encoded
software and select the setting that provides a good
sense of spaciousness and that best succeeds in
forming a cohesive space between the suxround
sound from the surround speakers and the sound of
the front speakers. If you are not sure which sounds
best, select 'BEHD/LO" or "BEHD/HI" and then
use the speaker distance parameter and speaker level
adjustments to obtain proper balance.
• DIMMER (Brightness of the
display)
Lets you adjust the brightness ill 3 steps.
Enjoying DolbyDigital
and DTSSurround sound
(AUTO FORMAT DIRECT)
The Auto Format Direct {A.F.D.) mode allows
you to listen to higher fidelity, sotmd and select
the decoding mode for listening to a 2 channel
stereo sound as multi chamael sotmd.
Press A.F.D. repeatedly to select
the sound field you want.
You can also use SOUND FIELD +/- on the
receiver.
For details, see "Types of A.F.D. mode" {page
45).
44_8