Customizing Your Remote Control - Samsung TX-P2665W Owner's Instructions Manual

SPECIAL FEATURES
Customizing Your Remote Control
Your TV comes equil_ped with a universal remote control. In addition to controlling the TV_
the universal remote control can also operate a Set-Top
Box, VCR,
Cable box and
DVD
(even
if yol u" VCR, Cable box and
DVD
are made by mare ffacU u'ers other than Samsl rag).
• The remote control might not be compatible with all VCRs,
DVD
players and Cable boxes.
Setting Up Your Remote Control to Operate Your VCR (Cable box
or DVD player)
1
Turn off yourVCR Cablebox or OVD player)
2
Pressthe MODE button and make sure thatthe VCR(CABLEor DVD} LEDis
Iluminateu.
_1 The remote control has five
modes: TV, STB, VCR, CABLE
and DVD.
3
Onyour Samsung remote comml, press the SET button.
4
Enter3 digits ofthe VCR(Cablebox or DVD player) code listed on next oage
for your brand of VCR(Cablebox or DVD playerr
_1 Make sure you enter 3 digits
of the code, even if the first digit
is a "0". (If more than one code
listed, try the first one.)
5
Pressthe POWERbutton on me remote control. Your VCR(Cable box or DVD
player)should turn on. If yourVCR (Camebox or DVD player)turns on,your
remote contro, s now set correctly.
<1 If your VCR (Cable box or
DVD player) does not turn] on,
repeat steps 2, 3, and 4, but try"
one of the other codes listed for
the brand of your particular VCR
(Cable box or DVD player).
6
Onceyour remote contro, ts set up, press the MODEbutton any time you warn
m use me remote m operate your VCR(Cable box or DVDplayer_.
• When your remote is in the TV mode, the VCR (or DVD player) control buttons (REW, STOP,
PLAY/PAUSE and FF) will still operate your VCR (or DVD player).
• When your remote control is in the VCR (CABLE or DVD) mode, the volume buttons still con
trol your TV_ vohlme.
63