Quick Start Guide - Whirlpool WED9250 Use And Care Manual

WARNING: To reduce the risk of fire electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS
before operating this appliance.
This Use and Care Guide covers several different models. Your dryer may not have all the cycles and features described.
USING AUTOMATIC CYCLES
Press POWER.
Select the desired AUTOMATIC cycle.
Adjust the DRYNESS level, if desired.
Select the WRINKLE SHIELD and/or SIGNAL feature,
if desired.
7. Press and hold START/PAUSE to begin.
To add or remove options during an Automatic Cycle:
You may select or deselect the WRINKLE SHIELD and/or
SIGNAL feature at any time during the cycle, if desired.

QUICK START GUIDE

USING TIMED CYCLES
Use Timed Cycles to set a drying time
and temperature. See the Cycles
information on the following pages
for more information.
Press POWER.
Select the desired TIMED Cycle.
5. Press More Time or Less time until the desired drying time
is displayed.
6. Press TEMP until the desired temperature glows.
Select the WRINKLE SHIELD and/or SIGNAL feature,
7.
if desired.
Press and hold START/PAUSE to begin.
8.
To add or remove options during a Timed Cycle:
You may select or deselect the WRINKLE SHIELD and/or
SIGNAL feature at any time during the cycle, if desired.
Press POWER.
Open the door or press START/PAUSE once.
Close the door and press and hold START/PAUSE.
Estimated
Time
Control Lock
Remaining
Sensing Wet Damp Cool Done Wrinkle
Down Shield
High
Medium
More
Low
Normal
Extra Low
Air Dry Less
On
5