Advertisement
Ө AUX OUT ON switch
Putting this switch in the ON position (switch DOWN) turns the auxiliary output channel on. In
the OFF
position (switch UP) the signal is cut before the AUX out control, allowing the
channel to be instantly muted.
a
ЕШ
|
AUX |
no
>
°
AUX OUT |
(AUK QUT LON)
-—
(+408)
AUX 2
(&UX OUT 2) >t
AUX OUT 2
|
(+4981
MASTER
1 MASTER
2 MASTER
3 MASTER
4 MASTER
5 MASTER
6 MASTER
7 MASTER
& AUX
| AUX
2 INPUT
CUE CUE CONTROL
MASTER
CUE
a
CH INPUT
AUX SUB IN I
AUX SUB IN 2
@ Talkback Assign switches
These switches determine to which buss the talkback signal is routed. Talkback may be sent to
any of the eight master outputs, the two auxiliary outputs, and the TB OUT connector.
This provides communication
not only with the performers, but also with the house sound
engineer (normally via the TB OUT facility), stage staff or even dressing rooms (the AUX
outputs are suitable for this purpose).
@ Talkback Input
A low impedance microphone should be connected at this terminal for talkback use. Nominal
input level and impedance are —50 dB/50—250 ohms.
Ө) Talkback INPUT LEVEL control
This control allows you to adjust the sensitivity of the TB input channel, to match the
microphone you are using. Nominal output level is obtained with the control at 8 on the scale.
@ TALKBACK switch
Turning this switch ON (switch DOWN) activates the TB microphone, providing communica-
tion with whichever outputs are selected using the Talkback Assign switches.
о
'10
INPUT LEVEL
MASTER
I MASTER
2 MASTER
3 MASTER
4 MASTER
5 MASTER
6 MASTER
7 MASTER
8 АОХ
| AUX
2 INPUT
CUE CUE
CONTROL
MASTER
CUE
TALKBACK
(TALK BACK)
rp
INPUT LEVEL
i
TALK BACK IN
(-5048)
»- MASTER OUT |
du
»— MASTER OUT 8
Ш
AUX OUT |
|
AUX OUT 2
»— TB OUT
Advertisement
