Advertisement
РНОМЕЗ
0
10
CUE/PHONES
B INPUT CUE
10
COMM
IN
COMMUNICATION
iON IN di
Ө PHONES
This is the output for the operator's stereo headphones. Low impedance type stereo headphones
should be used. Any CUE'd signal, and any input to the COMM IN jack (normally, the talkback
from the house PA console) may be monitored at this output.
CUE/PHONES level control
This control is used to control the signal level at the CUE output, and operator's headphone
volume. Nominal level is obtained with the control at 8 on the scale.
INPUT CUE indicator
|
This LED indicator will light when any of the channel input CUE switches, or AUX in CUE
switches are turned on. Please note that this indicator is unaffected
by the master CUE
switches; even if the master CUE switches are engaged, this indicator will not light.
COMM IN +4 dB switch
For direct communication with the house PA engineer, the normal procedure is to connect the
talkback or foldback output of the house PA console to the COMM IN jack on the rear of the
MC monitor mixing console. In this case, the —50 dB pad should be inserted (switch DOWN) to
maintain a compatible signal level. If a microphone is connected to the COMM
IN jack (for
example, for use by a stage manager) the +4 dB switch can be turned off (switch UP). When
this switch is in the OFF position, nominal input level is —50 dB; when it is ON, nominal input
level is +4 dB.
Q COMM IN level control
CH INPUT
ИНИН
AUX IN
- ||
Соми IN)
|
750)
|
она
X
p^
|
MASTER
Г MASTER
2 MASTER
3 MASTER
4 MASTER
5 MASTER
6 MASTER
7 MASTER
8 AUX
I AUX
2 INPUT
CUE CUE
CONTROL
MASTER
CUE
MASTER
LL
|
AUX
aye
о
| PHONES
AUX SUB IN I
AUX SUB IN 2
CUE SUB IN
У
CUE OUT
r1
144481
Ө AUX OUT level control
‚Ө AUX OUT CUE switch
Advertisement
