Advertisement
15
Communication between the monitor operator and the house
soundman is provided in the following manner: the monitor
operator
plugs
his
TB
microphone
into
the TB
input
connector on the front panel. The signal from this input is
sent out via the TB OUT connector, to the ECHO RETURN
input of the main house console (e.g., а Yamaha MC2404).
If the echo return input is not available, an input channel
could be used to receive the monitor TB. This signal would
not be assigned to any output on the house console, merely
(ALTERNATIVE DIRECT CONNECTION)
————
чинээ
онша
CE
арми
„| TALKBACK бы
FB OUT
INPUT
ECHO
"
Pom
E
PHONES
RTN
P.A. MIXING CONSOLE
(e.g. YAMAHA MC2404)
CUE'd for headphone monitoring by the engineer. The house
soundman sends his TB signal via his foldback output to the
COMM
IN connector of the monitor console. In this case the
+4 dB
pad
should
be inserted, and the COMM
IN level
contro! adjusted to maintain a correct signal level.
If communication
were
required
with
a stage manager,
conductor,
or
dressing
room,
a microphone
could
be
connected directly with the COMM
IN jack. In this case, the
*4 dB pad would not be needed.
] OMM
ІМ өө
ээж PHONES
pee
TALK
ІШ
ВАСК
ІМ
МС MONITOR
MIXING CONSOLE
TB OUT
«ене өө
Advertisement
