Table of Contents
Advertisement
Av Aperture-Priority AE
Check the viewfinder dispiay and
take the picture.
• If the shutter speed display does not
blink, a correct exposure will be obtained.
If the slowest shutter speed blinks, it
indicates urtderexposure. In such a
case, turn the
dial to set a larger
aperture (smaller f-number) until the
shutter speed display stops blinking,
it the maximum shutter speed blinks, it
indicates overexposure. In such a case,
tumthe<^>dial to set a smaller
aperture (larger l-number) until the
shutter speed display stops blinking.
Aperture Display
The aperture can be set and displayed in full and half stops as shown below.
The larger the number, the smaller the aperture opening will be. The displayable
range of apertures deper^ on the lens mounted on the camera.
l.a
li
(W
IB
m
IS
SB
3.S
HO
HS
5.6
S.h
8.0
9.S
M
13
ts
19
ee
SI
31
3B
HS
SH
6H
16
9 1
If no lens Is mounted on the camera, 'OB' mil be displayed for the aperture setting.
Depth-of-field Preview
To check the depth of field, press the
depth-of-field preview button. The
camera will stop down the aperture
and you can check the depth of field in
the viewfinder.
• Depth-of-field preview can be used only in Creative Zone modes.
• When you press the depth-of-Oeld preview button. AE lock also takes effect.
57
Advertisement
Table of Contents
