Table of Contents
Advertisement
Available languages
Available languages
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
8" or 10" pipe wrench
8" or 10" adjustable
wrench (for gas
connections)
Flat-blade screwdriver
Adjustable wrench that
opens to 1" (2.5 cm) or
hex-head socket wrench
(for adjusting dryer feet)
" nut driver or socket
wrench
Parts supplied
Remove parts packages from dryer drum. Check that all parts are
included.
Parts package
4 Leveling legs
NOTE: Do not use leveling legs if installing the dryer on a
pedestal.
Parts needed
Check local codes and with gas supplier. Check existing gas
supply, electrical supply and venting. Read "Electrical
Requirements," "Gas Supply Requirements" and "Venting
Requirements" before purchasing parts.
For close-clearance installations between 31.5" (80.01 cm)
and 37" (93.98 cm), see "Plan Vent System" section for
venting requirements.
Mobile home installations require special parts (listed following)
that may be ordered by calling the dealer from whom you
purchased your dryer. For further information, please refer to the
"Assistance or Service" section of this manual.
Mobile Home Installation Kit. Ask for Part Number 346764.
Metal exhaust system hardware.
INSTALLATION INSTRUCTIONS
Level
Knife
Vent clamps
Pipe-joint compound
resistant to LP gas
Caulking gun and
compound (for installing
new exhaust vent)
Pliers
Tape measure
37"
(93.98 cm)
Options
Pedestal
Are you placing the dryer on a pedestal? You have the option of
purchasing pedestals of different heights separately for this dryer.
You may select a 10" (25.4 cm), a 13" (33 cm) or a 15.5" (39.4 cm)
pedestal. These pedestals will add to the total height of the dryer
for a total height of approximately 48" (121.9 cm), 51" (129.5 cm)
or 53.5" (135.9 cm), respectively.
For a garage installation, you will need to place the 10" (25.4 cm)
pedestal at least 9" (22.9 cm) above the floor and the 13" (33 cm)
pedestal at least 6" (15.2 cm) above the floor. You will need to
place the 15.5" (39.4 cm) pedestal at least 3.5" (8.9 cm) above
the floor.
Optional pedestal
The pedestals are available in several colors.
To order, call the dealer from whom you purchased your dryer or
refer to the "Assistance or Service" section of this manual.
Pedestal
Color
Height
10" (25.4 cm)
White
10" (25.4 cm)
Biscuit
10" (25.4 cm)
Pewter
10" (25.4 cm)
Diamond Dust
(Silver)
13" (33 cm)
White
13" (33 cm)
Biscuit
13" (33 cm)
Pewter
15.5" (39.4 cm)
White
15.5" (39.4 cm)
Biscuit
15.5" (39.4 cm)
Pewter
15.5" (39.4 cm)
Diamond Dust
(Silver)
Stack Kit
Are you planning to stack your DUET
so, you will need to purchase a Stack Kit.
To order, call the dealer from whom you purchased your dryer or
refer to the "Assistance or Service" section of this manual. Ask
for Part Number 8541503.
Part Number
WHP1000SQ
WHP1000ST
WHP1000SL
WHP1000SU
LAB2700MQ
LAB2700MT
LAB2700ML
WHP1500SQ
WHP1500ST
WHP1500SL
WHP1500SU
®
washer and dryer? To do
5
Advertisement
Table of Contents
