Choosing The Powersources - Sony CFD-S20CP Operating Instructions Manual

Choosing the powersources
You can use the AC power or batteries as a power source.
[] Battery
compartment
[] AC IN
_ to a wall outlet
_1 Connecting the AC power cord
Insert one end of the supplied AC
power cord to the AC IN socket located
at the rear of the player, and the other
end to the wall outlet.
_1 Preparing the remote
Insert two size AA (R6) batteries (not
supplied).
Replacing batteries
With normal use, the batteries should last for
about six months. When the remote no
longer operates the player, replace all the
batteries with new ones.
[]Using the player on batteries
Insert six size D (R20) batteries (not
supplied) into the battery compartment.
To use the player on batteries,
disconnect the AC power cord from the
Replacing batteries
Replace the batteries when the OPR/BATT
indicator dims or when the player stops
operating. Replace all the batteries with new
ones.
Notes
• Before you replace the batteries, be sure to take
out the CD from the player.
• When you operate the player with the baneries,
you cmmot turn on the player with the remote.
_n
C
23