Table of Contents
Advertisement
Installation
I ns t a I Ia t io n In st r u ct i o n
* The connection panel is hidden behind the A/V cover.
a. Remove the cover.
b. Install wires as necessary.
c. Reinstall the cover. Position the A/V cover with the TV
back panel, tilt it back as shown.
d. Align the holes on the TV back panel with the two tabs
on the rear AN cover and insert.
e. Close cover.
- Thread, then pull the wires through the hole on the TV
stand.
- You can adjust the vertical angle of the TV between 3°
and !2 °.
- The TV can be conveniently
swiveled on its stand
25 ° (L23W36) / 30°(L17W36)
to the left or right to provide
the optimum viewing angle.
-An optional wall mount is available for this TV, see your dealer.
For installation, follow the instructions
provide with the optional wall mount.
!0
Advertisement
Table of Contents
