Samsung DVD-VR335 Instruction Manual page 53

Press the MARKER button during playback.
| Playing back a Marker
Press the MARKER button during playback.
Press the _1 t,- buttons to select a marked scene.
Press the ENTER button when the desired scene
appears.
3
4
* The number 01 is displayed and the scene is
memorized.
Press the _1 I_ button to move to the next position.
Press the ENTER button again when the desired
scene appears.
3
Press the ENTER or _ll button to start playing
from the selected scene.
• If you press the NEXT SKIP (_J)button or the
PREVIOUS SKIP(Nl_)button in marker mode,
and the next or current marked point plays for
shorter than three seconds, playback starts from
the previous marked point.
| Clearing a Marker
Press the MARKER button during playback.
Press the _ I_ buttons to select a marked scene.
Press the CANCEL button to delete the selected
mark.
iiiiiii_iiii_iiiiiii_
iiiiiii_y_31
iiiiiiiii
iiiiiiiiiiii
* The number 02 is displayed and the scene is
memorized.
* DVD-RAM or DVD-RW (VR Mode) discs have
the Marker function instead of the Bookmark
function. The Marker function allows you to mark
up to 99 scenes. Since the scenes may be dis-
played as many different pages, numbering is
necessary, tf a disc in use is encoded with Disc
Protect, Markers cannot be set or deleted. Only
playback is available.
• When a marker is cleared while DVD-RAM/
DVD-RW(VR mode) is playing, marker numbers
will change. For example, if the 7th marker is
cleared after ten markers are registered, the
marker numbers after the eighth will automatical-
ly move ahead by one and the 8th marker
becomes the 7th.
English - 53