Advertisement
This product is designed to accommodate screens with Vesa
pattern. For safe mounting, please make sure that mounting screws turns at least
three complete turns in the screen inserts.
FOR VESA 75 MOUNTING PATTERN: 1.
Choose hole pattern indicated below. 2. Attach
tilt/adapter plate to back of monitor using four
10 mm screws (G) as indicated below. 3. If
hole pattern is in a pocket, attach tilt/adapter
plate to back of monitor using four 20 mm
screws (H) and four retaining spacers (C) as
indicated below.
Note: Screen may appear slightly
different than illustrated
FOR VESA 100 MOUNTING PATTERN: 1.
Choose hole pattern indicated below. 2. Attach
tilt/adapter plate to back of monitor using four 10
mm screws (G) as indicated below. Note: If you
don't get three complete turns in the screen
inserts, use four M4 x 12 mm screws (F) instead
of four M4 x 10 mm screws (G).
Note: Screen may appear slightly
different than illustrated
Visit the Westinghouse Web Site at www.westinghousedigital.com
TILT/ADAPTER
PLATE
4 of 6
®
compliant hole
For screens with a hole
pattern in a pocket,
spacers (C) go between
tilt/adapter plate and
monitor.
ISSUED: 04-16-04 SHEET #: 095-9194-1
For customer service call
1-866-287-5555
G or H
TILT/ADAPTER
PLATE
G or F
.
Advertisement
