Advertisement
Table of Contents
- 1 Insert the Ends of the Ring in the Joint Piece.
- 2 Press on the Hand Whilst Holding the Mechanism from Underneath.
- 3 Respect the Correct Position of the Hands.
- 4 Don’t Forget to Set the Battery in Place.
- 5 Wind the Minute Hand Clockwise until the Desired Time Is Reached.
- 6 Never Wind the Minute Hand in the Anti-Clockwise Direction.
- Download this manual
MICRO ANDA
Instrucciones de montaje
Assembly instructions
1
2º
2
1º
Realizar un agujero M6, insertar el taco y
roscar el anclaje de madera a la pared.
Make an M6 hole, insert the wall plug and
thread the wooden anchor to the wall.
3
4
1. Presione las agujas mientras sostiene
el mecanismo desde abajo.
(primero la ahujas horaria y después la aguja minutera)
1. Press on the hand whilst holding the
mechanism from underneath.
( rst the hour hand and then the minute hand)
ATENCIÓN:
Respetar la correcta posición
de las agujas.
CAUTION:
Respect the correct position
of the hands.
Insertar los extremos del
aro en la pieza de unión.
Insert the ends of the
ring in the joint piece.
2
n
1
r
Advertisement
Table of Contents
Related Manuals for nomon MICRO ANDA
Summary of Contents for nomon MICRO ANDA
- Page 1 MICRO ANDA Instrucciones de montaje Assembly instructions 1º 2º Realizar un agujero M6, insertar el taco y roscar el anclaje de madera a la pared. Make an M6 hole, insert the wall plug and thread the wooden anchor to the wall.
- Page 2 With your index nger, wind the minute (long) hand clockwise until both hands are at 12 o’clock. Then, to set the time, continue to wind the minute hand clockwise until the desired time is reached. NEVER wind the minute hand in the anti-clockwise direction. www.nomon.es...
Need help?
Do you have a question about the MICRO ANDA and is the answer not in the manual?
Questions and answers