Adjusting Settings
3.2 Setting the Main Display Mode
You can switch between input sources and display them on the main screen
in sequence by repeatedly pressing either:
•
•
The Main display mode rotates between:
•
•
•
•
•
The OSD menus for each display mode allow you to set options that are spe-
cific to the selected video signal format. Refer to "Adjusting Settings" on
page 11 for information on adjusting settings for each display mode.
3.3 Setting the Picture-in-Picture Display Mode
The LCD display is capable of displaying a second video input signal on the
LCD screen at the same time as the main signal. This second signal, or
source, is shown on the LCD screen in a box over top of the main image -
this is referred to as "Picture-in-Picture" (PIP).
the SOURCE key on the remote control
the SOURCE key on the LCD control panel
TV
AV
S-Video
YPbPr
VGA
1 : TV
PIP display mode indicator
1 : TV
2 : OFF VGA YPbPr
Main display mode indicator
2 : OFF VGA YPbPr
12