Page 3
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This “bolt of lighting” indicates unin- The “exclamation point” calls atten- sulated material within your unit may tion to features for which you should cause an electrical shock.For the safety of read the enclosed literature closely to pre- everyone in your household, please do not...
Page 4
I.Safety Prevention Measures Please always place The altitude and the Do not hold the plug Do not use a broken this device on a stable tropical environment w i t h w e t h a n d ; power plug nor keep surface;...
II.Installation Instructions 1.Accessories Power cord Base/Stand Signal cable Warranty card User manual Quick Start Guide Screws (The above pictures are for illustration only and the physical accessories shall govern.) 2. Angle Adjustment 2.1 The screen can be adjusted by 2.2 When adjusting the angle of the inclining forward and backward;...
Page 6
III. Connect the Monitor to PC Before connecting the LCD monitor to the PC , please power down the PC and the monitor . VGA Port Connect the VGA cable into the VGA IN port in the back of the monitor (this needs the support of the monitor).
IV. User Setup 1. Schematic Diagram of Keys 2. Description of Keys' Functions Pops up the menu/Backs to the previous menu (in case of main menu, exits from the whole menu). When the OSD is opened, as the up/right function selection key, ▲...
Page 8
V. Operation Menu (OSD) Function Descriptions Second First level First level Second level Third level Third level Description level menu item menu icon menu item menu item menu icon menu icon Brightness Adjust display brightness NONE NONE NONE NONE Adjust display contrast Contrast NONE NONE...
Page 9
English English English Deutsch Deutsch Deutsch Español Español Español 한국어 한국어 한국어 Language 日本語 日本語 日本語 Русский Русский Русский Return to the previous menu Return Exit Exit from the whole menu Automatically turn off after saving power for 1minute Inactivate the function of timed switch-off Power Return to the previous menu Return...
Page 10
VI. FAQ Faults occurring Possible solutions The power indicator ◆ Check if the power is on. light is not on ◆ Check if the power cord is connected. ◆ Check if the function of plug-and-play of the device is compatible with PC. Impossible plug-and-play ◆...