Mitsubishi MELSEC-A AJ71PT3 User Manual page 10

I
1. INTRODUCTION
IMELSEC;4
(5) The MINI link may be used with the MELSECNET system. Any
of the tier two master station and the tier three master station
and local stations in the MELSECNET may be used as the
master station in the MINI link.
(6) Ease of machining optical cable connectors
Optical cable connectors can be machined easily by the user
with the tool kit available from Mitsubishi.
(7)
Ease of checking luminous energy in optical data link system
In luminous energy check mode of the master module,
luminous energy can be checked by connecting the optical
power tester to the receive connector of each remote I/O
station.
REMARKS
I
The
MINI link
does not have a loopback function as it has only one loop of data link
cables.
1-3
•
•
IS (NA) 66164-A