Section 7 - Maintenance; Maintenance Chart - Recommended Service Intervals - Scag Power Equipment STCII-61V-36BV Operator's Manual

R

7.10 MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS

HOURS
BREAK-IN
8 20
(FIRST 10)
X
X
X
X
X
X
X
X
X
X
X
X
* Perform these maintenance procedures more frequently under extreme dusty or dirty conditions
MAINTENANCE
40 100 200 500
Check all hardware for tightness
Check hydraulic oil level
Check all belts for proper alignment See paragraph 7.8
Check hydraulic fittings and hoses
for leaks
Check engine oil level
*Clean mower
Check condition of blades
Apply grease to fittings
Check tire pressure
Inspect seat belt for wear or damage See paragraph 2.6
Check the operator interlock system See paragraph 4.4
Change engine oil and filter
Check battery electrolyte level clean
X
battery posts and cables
Check belts for proper alignment
X
Inspect pump drive belt. Replace
X every 400 hours or 2 years,
whichever comes first
Check condition of fuel lines
X
Apply grease to fittings
X
Change engine oil
X
*Clean air cleaner element
X
PROCEDURE
38
Section 7
COMMENTS
See paragraph 7.3
Use extreme caution when
checking the hydraulic hoses.
See paragraph 2.7
See paragraph 7.4
See paragraph 7.11
See paragraph 7.9
See paragraph 7.2
See paragraph 7.10
See paragraph 7.4
See paragraph 7.7
See paragraph 7.8
See paragraph 6.4 & 7.8
See paragraph 7.2
See paragraph 7.4
See paragraph 7.6