Page 9
Note 0+ (0–13kg) i-Base ™ infant child restraint Instruction Manual This product is approved to CNS 11497 series of amendments. Please read all the instructions in this manual before installing and using the product.
1 - 3 to be part of your journey with your little one. While traveling with the Joie i-Base™ 2 infant child restraint you are using a high quality, fully cer- English tified safety Group 0+ infant child restraint. This product is suitable for use with children weighing under 13kg (approximately 1.5 years old or...
Your infant child restraint or base must always be DO NOT use another manufacturer’s insert or base with secured in the car. this infant child restraint. See your distributor for Joie NEVER leave your child unattended with this infant child replacements ONLY.
For Installation with 3-point-belt or ISOFIX System when it is not in use for a long period of time. 1. The Joie Child Restraint with Base is a "Semi Universal Child Consult the distributor for issues concerning maintenance, Restraint". Suitable for installation on vehicle seat.
Parts List 3. Open the lock-off and route the vehicle safety belt through the belt path (Fig. 4.1), and lock it into the buckle. (Fig. 4.2) Fig. 1.1 ISOFIX Connector 4. Tighten the vehicle safety belt as much as possible while pushing Fig.
Page 14
click both ISOFIX connectors into the ISOFIX anchor points. (Fig. 12) Make sure that both ISOFIX connectors are securely attached to their ISOFIX anchor points. The colors of the indicators on the both ISOFIX connectors should be completely green. (Fig. 12.1) Check to make sure the base is securely installed by pulling on the both ISOFIX connectors.
Page 15
Share the joy at joiebaby.com IM-000769I IM-0 00 7 69A...
Need help?
Do you have a question about the i-Base 2 and is the answer not in the manual?
Questions and answers