Graco GM 3500 Manual page 25

Workinq under the mountina plate (A)
of
1-2
the cart, remove the screw'(15), iock-
washer (80) and washer
(34)
which hold
the clutch housing (2) to
the
cart.
See
Fig
25-1,
Still working under the mounting plate,
remove the
two
locknuts
(61
or
100)
and
lockwashers
(9),
and then pull the
screws (14) out of the base of the en-
gine. Disconnect the red wire from the
engine lead (B). Disconnect the black
and white wires (29)
from
the field. Pull
the wires carefully through the grom-
mets
(66)
before removing the engine.
See Fig 25-1 and 25-2.
.
Lift the engine carefully and place it on
a work bench.
.
Remove the Field and Wiring Harness,
Clamp and
Clutch Houslna.
as in-
structed on pages
26
and
27-
.
Skip ahead
to Reassembly,
page 28,
Step 1.
29
NOTE: All service to
the
enpine must be
A
Y @ , O
performed by an- authorized
HONDA dealer.
I I \
'
32
Fig 25-1
TO
ENGINE
RED
WHITE
PLATE ON UPRIGHT CART
VIEW FROM UNDER ENGINE MOUNTING VIEW FROM UNDER ENGINE MOUNTING
PLATE ON LO-BOY CART
Fig 25-2