Viewing Images On A Tv Screen - Sony Cyber-shot CSS-HD2 Operating Instructions Manual

Viewing images on TVs other than high-
definition TV
Connect the AN OUT jack of the Cyber-shot
Station and the audiolvideo input jacks of the
TV.
3
Turn on the TV and set the input switch to
the input connected in step 1.
4
Press
~/~
on the Control buttons of the
Remote Commander to select the image.
You can also select the image by pressing
~/~
on the Control buttons of the camera.
• The Cyber-shot Station is compatible with both
NTSC and PAL TV systems. For further details,
see the operating instructions supplied with the
camera.
I.
:j • . .
C
E
Red • Audio
~
White
~
. . Yellow
<iJ)
Video
AN connecting cable
• Turn off the TV before connecting the Cyber-
shot Station and TV with the Component
AN
Cable.
• The signal format to be output from the AN
OUT jack depends on the camera setting.
• To view the 1080i format images, you need a •
TV compatible with 1080i format.
• The audio to be output from the Cyber-shot
Station via the NV OUT jack is monaural.
• The Cyber-shot Station is not compatible with
the S-VIDEO connecting cable.
2
Turn on the power by pressing the
[E
(playback) button of the camera or the
POWER button on the Remote Commander.
'~'Tips
• The buttons on the camera or the Remote
Commander may not function immediately
after the camera is attached to the Cyber-
shot Station. This occurs when the camera is
booting up and is not a malfunction. Wait for
about 10 seconds.
• Audio
~
ey
• PB/CB
• PRICR
_"'lIIIlI-.Green
'==f--" Blue
Red
Component AN Cable
,,==---,r---~ Red
--<IIIlIDWhite
1
Viewing images on a high-definition TV
Connect the
AN
OUT jack of the Cyber-shot
Station and the Component AV jacks of the TV.
On battery life
• The battery life is limited. Battery capacity
decreases little by little as you use it more and
more, and as time passes. If the battery operating
time seems shortened considerably, a probable
cause is that the battery pack has reached the end
of its life. Buy a new battery pack.
• The battery life varies according to how it
is stored and the operating conditions and
environment in which each battery pack is used.
Viewing images on a TV
screen
You can playback images by connecting the Cyber-
shot Station to the TV with the
AN
connecting
cable (supplied) or the Component AIV Cable
(supplied).
Refer to the operating instructions supplied with
the TV for connection.
UNotes
• After attaching the camera to the Cyber-shot
Station, the CHARGE lamp may blink slowly for
3 to 10 seconds. This indicates communication
between the camera and the Cyber-shot Station,
and it is not a malfunction.
• If CHARGE lamp does not light or blinks for
more than 10 seconds, refer to "Troubleshooting':
Charging temperature
The temperature range for charging is 0 °C to
40°C (32 OF to 104 OF). However, to provide
maximum battery efficiency, the recommended
temperature range when charging is 10°C to
30 °C (50 OF to 86 OF).
1S-GB