26G8
Follow the steps below to make the minimum
number of basic ac_iustments for using the
system.
To skip an adjustment,
press I_'IIH To return to
the previous
acliustment, press I'_.
3
4
• Disconnect the headphone when you pertbzm
the Quick Setup You cannot operate steps after
11 with the hea@hone connected
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press [ENTER]
to run QUI(K
SETUP.[
appears at the bottom of the screen. If this
message does not appear, display the Quick
Setup and perform
again (page 27).
• When you press CLEAR in message, the
message disappears. When you need to perform
the Quick Setup, see "To recall the Quick Setup
display" (page 27)
Press ENTER without inserting a disc.
The Setup Display _r selecting
_e
language used in the on-screen
display
appears.
Press
,t,/4, to select
a language.
The system displays the menu and subtitles
in the selected
language.
rm_
• The selectable language is different depending
Oil
the
area.
Press ENTER.
The Setup Display _r selecting the aspect
ratio of the TV to be connected
appears.
SETUP
Press .1'/4,to select the setting
that
matches your TV type.
• If you have a 4:3 standard TV
[4:3 LETTER
BOX] or [4:3 PAN S(AN]
(page 73)
• If you have a wide-screen
TV or a 4:3
standard TV with a wide-screen
mode
[16:9] (page 73)
Press ENTER.
The Setup Display _r selecting the speaker
distance appears.
Press ,t,/4, to select the front speaker
distance from the listening position,
then press ENTER.
You can set from 1.0 to 7.0 meters (4 to 23
ft).