Beko HII64200FMTW User Manual page 20

Activating the timer
1. Switch on the hob by touching
2. Adjust the desired temperature level by
touching the zone
3. Activate the timer by touching the
key. "00" symbol and decimal point of
selected zone will blink on timer display.
4. Set the desired duration by touching the
timer / keys.
5. After 10 second, the setting will be activ-
ated. Decimal point of selected zone will
blink on timer display.
6. In order to set the timers of the other
cooking zones, repeat the process ex-
plained above.
If more than one timer value are set
to different zones, the zone timer
which has minimum timer value is
displayed on the timer display and
the decimal point for that zone
blinks. The decimal points of the
other zones illuminate continu-
ously.
You can see the remaining cooking
time by touching the
cooking zone. For each touching,
different zone timer value is dis-
played. Finally, the minimum timer
value is displayed again.
Timer cannot be set without select-
ing the cooking zone and its tem-
perature value.
The timer can only be set for the
operating cooking zones.
key.
/ keys.
key of all
EN / 20
Deactivating the timer
Once the set time is over, the hob will be
switched off automatically and give audible
signal sound. Press any key to silence the
audible signal sound. If you do not press
any key, the signal sound will be cancel
after a few minutes.
Deactivating the timers earlier
ü If you deactivate the timer earlier, the
hob will keep on operating at the set
temperature until it is switched off. You
can deactivate the timer earlier in two
different ways:
1. Deactivating the timer for related
zone by dropping its value to "00":
Touch the timer
appears on the display of the cooking
zone whose timer is active.
ð Decimal point symbol of the re-
lated zone will permanently goes
off and the timer will be canceled.
ð Deactivating the timer for re-
lated zone by touching the re-
lated zone
eously: Touch the related zone
keys simultaneously.
ð Decimal point symbol of the re-
lated zone will permanently goes
off and the timer will be canceled.
After this step, the temperature
level of the related zone will be "0"
also with the timer level.
Stop function
ü You can decrase operating temperat-
ure level of the cooking zones to min-
imum level (level 1) by means of this
function.
If the timer is set for any cooking
zone, it will continue operating dur-
ing stoppage.
1. Touch the key when any of the cook-
ing zones is operating.
/ keys until "00"
/
keys simultan-
EN
CS
PL
/