Table of Contents
Advertisement
Windows® 7
It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless
adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
1. Click on the wireless icon in your system tray (lower-right corner).
Wireless Icon
2. The utility will display any available wireless networks in your area.
3. Highlight the wireless connection with Wi-Fi name (SSID) you would like to connect to and
click the Connect button.
If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter.
Refer to the Networking Basics section in this manual for more information.
4. The following window appears while your computer tries to connect to the router.
76
Advertisement
Table of Contents
