Two Notes OPUS User Manual page 24

Last update: 2023/11/06 14:11
1. Using the DynIR™ Engine
To create a foundation tone for your preset, first select a preamp, a poweramp and a cabinet. OPUS
comes with a collection of 32 DynIR™ Virtual Cabinets preloaded into the internal memory. Click on
the blue screen or the drop-down arrow to access the list of cabinets preloaded within OPUS. Using
Torpedo remote's filtering options, you can:
Filter the results by showing either BASS or GUITAR cabinets.
View and audition the cabinets stored in the unit by selecting "TORPEDO".
Preview cabinets included in your license that are stored in your computer by selecting
"COMPUTER".
Audition any cabinets from the Two notes Store by selecting "ONLINE"; please note, when this
button is ticked, the list of browsable cabinets will increase significantly as it will show the
entire Two notes catalog of 700+ DynIR™s.
2. Using a 3rd party IR
OPUS can load up to 512 static IRs. Import of static IRs is actioned via the desktop variant of Torpedo
Remote through the IR MANAGER tab. Upon upload into OPUS, the IR's length can be set to 20-, 40-,
100- or 200-ms long. If the IR is longer than the specified value, it will be shortened by Torpedo
remote to the selected length; if it is shorter it will be extended (filled with zeros) to the selected
length. OPUS' internal memory has the following allowances in relation to the length of the IR(s)
imported into its DSP architecture:
512 slots for 20ms IRs, in 4 banks of 128 slots
256 slots for 40ms IRs, in 4 banks of 64 slots
84 slots for 100ms IRs, in 4 banks of 21 slots
44 slots for 200ms IRs, in 4 banks of 11 slots
In order to load a static IR, first select the IR LOADER mode in Torpedo Remote. The window will have
a similar layout to the VIRTUAL CABINET. You can load up to 2 static IR files simultaneously providing
they are both loaded within the internal memory of OPUS (one IR per channel). On each channel, the
following controls are available: Mute (M), Bypass (B), Phase (ø) and IR Volume (actioned via the
Channel Fader). You can further refine your Static IR tone with OPUS' suite of built-in Post FX including
the EQ, ENHANCER and REVERB.
To import or remove 3rd-party IRs in OPUS, registration of OPUS to your Two notes account via
Torpedo Remote is required. You cannot import or remove 3rd-party IRs when using Torpedo Remote
in Guest mode. To load a file into OPUS' internal memory, please use the IR MANAGER window.
https://wiki.two-notes.com/
opus:opus_user_s_manual https://wiki.two-notes.com/doku.php?id=opus:opus_user_s_manual
Printed on 2023/11/06 14:11