Configuring RAID
My Book Premium Edition II is preformatted for Windows (NTFS) and is
pre-configured for RAID 0 (Striped) mode for maximum capacity and accelerated
performance. This product also supports RAID 1 (Mirrored) mode for data protection
with instantaneous and automatic data updates.
Important: If you have existing data, make sure to back up all files stored in the
My Book onto another storage device before you proceed.
1. To configure or change the RAID setting, select the device from the menu and
click Next.
2. Select the desired RAID configuration by clicking RAID 0 or RAID 1 (the
following example shows RAID 1). Select Quick NTFS format if you want the
drive formatted automatically following completion of the new RAID setting.
3. Enter the confirmation number provided, then click Yes. When prompted again,
click Yes to confirm.
MY BOOK PREMIUM EDITION II
MY BOOK RAID MANAGER FOR WINDOWS – 8
USER MANUAL