Installing The Drive - Western Digital My Book WDG2NC10000 Quick Install Manual
Triple interface dual-drive storage system with raid
Hide thumbs
Also See for My Book WDG2NC10000:
- User manual (12 pages) ,
- Specifications (2 pages) ,
- Install manual (2 pages)
Advertisement
Installing the Drive
Windows
Important: You must first install the drive utilities on the included CD before connecting the unit.
1. Turn on your computer.
2. Insert the software CD into the CD-ROM drive.
3. The CD autoruns and drive utilities are installed automatically. If a security alert is displayed during this
installation, click Accept or Continue.
Note: If AutoPlay is disabled on your computer, you must run the CD manually.
4. A menu displays a list of options including software, documentation, and a registration link. Click My Book
RAID Manager to install this utility.
5. When finished, click any other selection of your choice; otherwise, click Quit to close the menu.
6. Connect the unit's power cord and interface cable (USB, FireWire 800, or FireWire 400) as shown, after
which the unit mounts to the system.
My Book is now ready for use. For further information including product features, utilities, RAID configuration,
drive replacement, and troubleshooting, refer to the user manual provided on the CD.
My Book Premium Edition II | 2
Advertisement
