Advertisement
3.28
Adjusting combination instrument function
Info
When the vehicle is delivered, only the SPEED/H and SPEED/ODO display modes are activated.
3.29
Setting the clock
Condition
The motorcycle is stationary.
–
Repeatedly press the button
bottom right of the display.
–
Press the button
The Setup menu is displayed and the active functions are
shown.
Info
If no button is pressed for 10–12 seconds, the settings
are automatically saved.
400318-01
If no button is pressed for 20 seconds, or if an impulse
comes from the wheel speed sensor, the settings are
automatically saved and the setup menu is closed.
–
Repeatedly press the button
tion flashes.
The selected function flashes.
Activating the function
–
Press the button
The symbol continues to appear in the display and the
next function appears.
Deactivating a function
–
Press the button
The symbol disappears in the display and the next
function appears.
Condition
The motorcycle is stationary.
–
Repeatedly press the button
bottom right of the display.
–
Press the button
The hour display flashes.
–
Adjust hour display with the button
–
Wait 3 - 5 seconds.
The next segment of the display flashes and can be set.
–
You can set the following segments in the same way as the
hours by pressing the button
400330-01
Info
The seconds can only be set to zero.
If no button is pressed for 15–20 seconds, or if an
impulse comes from the wheel speed sensor, the
settings are automatically saved and the setup menu is
closed.
briefly until H appears at the
for 2–3 seconds.
briefly until the desired func-
.
.
briefly until CLK appears at the
for 2–3 seconds.
and/or button
and the button
WORK 3
.
.
35
Advertisement
