Page 1
5 mm dB(A) due to risk of impaired Air Pressure 90 psi (6.3 bar) Uncertainty Uncertainty hearing! K= 1.35 m/s ² K= 3dB Net Weight 3.04 lbs (1.38 kg) SUMAKE INDUSTRIAL CO., LTD ST-6531-S-2010A-01F 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91...
Page 2
There is no user serviceable part inside this tool. Sumake is a manufacturer and exporter of air mechanism, and may cause trouble. So, install an Please send the tool to a qualified personnel or our tools since established.
ST-6531 AIR POWERED DEHIDER PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty 6531-01 Cover Screw 6531-41 O-Ring 6531-02 Greas Fittin 6531-42 Roll Pin 6531-03 Spring Lock Washer Air Motor Assembly [Incl. 30, 31, 32, 33, 6531-04 Blade Cover...
DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment: AIR POWERED DEHIDER Model/ Serial No.:ST-6531 to which this declaration applies, complies with these normative documents: ...
Page 5
CUTTER(SAW) Original instructions SUMAKE Industrial Co. Ltd.
Page 6
The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
Page 7
other parts of the body. 2. While using the tool, the operator should adopt a comfortable posture whilst maintaining secure footing and avoiding awkward or off-balanced postures. The operator should change posture during extended tasks which may help avoid discomfort and fatigue. 3.
the hazard, the risk of injury and the avoidance action to take. General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet. Also, every 3 to 4 hours of operation, oiling is necessary.
Need help?
Do you have a question about the ST-6531 and is the answer not in the manual?
Questions and answers