Table of Contents
Advertisement
Quick Links
SUMAKE
Specification:
Free Speed
Cutting Capacity
Air Consumption
Overall Length
Air Inlet (PT)
Air Hose (I.D.)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
PNEUMATIC TOOLS
3" Cut Off Tool
ST-P6627
21,000 r/min
Wheel Dia. 3"
10 CFM (193 L/min)
7.6" (193 mm)
1/4" (6.35 mm)
3/8" (10 mm)
90 psi (6.3 bar)
1.6 lbs (0.8 kg)
Noise and Vibration:
Vibration
EN ISO 28927-4
Sound Pressure Level
Load:
0.8 m/s²
Uncertainty
K= 1.5 m/s
²
Noise
EN ISO 15744
Please always
No load: 77 dB(A)
Sound power level
environment
No load: 88 dB(A)
noise level > 80
dB(A) due to
risk of impaired
Uncertainty
K= 3dB
ST-P6627-S-2306F-STF
Remark
wear ear
protector at
hearing!
Advertisement
Table of Contents
Related Manuals for Sumake ST-P6627
Summary of Contents for Sumake ST-P6627
- Page 1 3/8” (10 mm) dB(A) due to risk of impaired Air Pressure 90 psi (6.3 bar) Uncertainty Uncertainty hearing! K= 1.5 m/s K= 3dB ² Net Weight 1.6 lbs (0.8 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 ST-P6627-S-2306F-STF...
- Page 2 DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： 3" CUT OFF TOOL Model/ Serial No.： ST-P6627 to which this declaration applies, complies with these normative documents: Machinery Directive: 2006/42/EC ...
- Page 3 Other factors outside the tool may cause loss of power or erratic action Reduced compressor output, excessive drain on the air line. moisture or restrictions in air pipes or the use of hose connection of improper size or poor ST-P6627-I-1105B-ST...
- Page 4 ST-P6627 3" CUT-OFF TOOL PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty P6627-18 Air Regulator Set [Incl. 1, 2, P6627-01S 3(2), 4] P6627-19 Rotor Blade P6627-02 O-Ring (P12) P6627-20 Rotor P6627-03 O-Ring (P8) P6627-21S Cylinder Set [Incl. 18(2), 21]...
- Page 5 CUTTER(SAW) Original instructions SUMAKE Industrial Co. Ltd.
- Page 6 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 7 other parts of the body. 2. While using the tool, the operator should adopt a comfortable posture whilst maintaining secure footing and avoiding awkward or off-balanced postures. The operator should change posture during extended tasks which may help avoid discomfort and fatigue. 3.
- Page 8 the hazard, the risk of injury and the avoidance action to take. General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet. Also, every 3 to 4 hours of operation, oiling is necessary.
Need help?
Do you have a question about the ST-P6627 and is the answer not in the manual?
Questions and answers