Advertisement
Quick Links
SUMAKE
Specification:
Free Speed
Cutting Distance
Air Consumption
Overall Length
Air Inlet (PT)
Air Hose (I.D.)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD.
4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan
PNEUMATIC TOOLS
Air Knife W/1pce Blade
ST-M5032
20,000 s.p.m.
3mm
13 CFM (368 L/min)
7-2/3" (195 mm)
1/4" (6.35 mm)
3/8" (10 mm)
90 psi (6.3 bar)
2.1 lbs (0.97 kg)
Noise and Vibration:
Vibration
EN ISO 28927-8
Sound Pressure Level
No load: 82.8 dB(A)
No Load:
10.71 m/s²
No load: 93.9 dB(A)
Uncertainty
K= 1.5 m/s
²
Noise
EN ISO 15744
Please always
protector at
Sound power level
environment
noise level > 80
dB(A) due to
risk of impaired
Uncertainty
K= 3dB
ST-M5032-S-2011C-D5F
Remark
wear ear
hearing!
Advertisement
Related Manuals for Sumake ST-M5032
Summary of Contents for Sumake ST-M5032
- Page 1 Air Pressure 90 psi (6.3 bar) Uncertainty Uncertainty hearing! K= 1.5 m/s K= 3dB ² Net Weight 2.1 lbs (0.97 kg) SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan ST-M5032-S-2011C-D5F...
- Page 2 DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： AIR KNIFE W/1PCE BLADE Model/ Serial No.： ST-M5032 to which this declaration applies, complies with these normative documents: ...
- Page 3 Use a 3 HP or larger To install a new blade, loose the black hexagon Sumake is a manufacturer and exporter of air 1. This tool is not insulted for coming into compressor for each sander.
-
Page 4: Air Knife
ST-M5032 AIR KNIFE PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty M5032-01 Screw (M8x20) M5032-24 Rotor M5032-02 Retainer M5032-25 Rotor Blade M5032-03 Blade 57mm (2-1/4") M5032-26 Cylinder M5032-04 Packing M5032-27 Rear End Plate M5032-05 Spindle Drive M5032-28 Ball Bearing (696ZZ) - Page 5 CUTTER(SAW) Original instructions SUMAKE Industrial Co. Ltd.
- Page 6 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 7 other parts of the body. 2. While using the tool, the operator should adopt a comfortable posture whilst maintaining secure footing and avoiding awkward or off-balanced postures. The operator should change posture during extended tasks which may help avoid discomfort and fatigue. 3.
- Page 8 the hazard, the risk of injury and the avoidance action to take. General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet. Also, every 3 to 4 hours of operation, oiling is necessary.
Need help?
Do you have a question about the ST-M5032 and is the answer not in the manual?
Questions and answers