Carrying Handle - Makita VC010G Instruction Manual

CAUTION:
Be sure to unlock the foot lever
before operating. Rough handling may cause break-
age of the parts.
Fig.22
NOTE: While the appliance is in the upright position,
the brushroll stops rotating.
Adjusting the height of the brushroll
CAUTION:
Always make sure that the adjust-
ing lever comes into the position properly before
operation.
The height of the brushroll can be adjusted in 5 steps.
Turn the adjusting lever to your desired position by
referring to the following table.
Adjusting lever
Brushroll height
position
The brushroll stays positioned to the top
from the floor, which is suitable for cleaning
A ( )
long-haired carpets.
The brushroll is positioned lower to the
floor, which is suitable for cleaning hard
B ( )
floors and short-haired carpets.
The brushroll extends to be positioned
down to the floor, which is effective for
deep cleaning carpets and removing dirt,
C ( )
dust and particles embedded deep in the
fibers.
A
Fig.23
► 1. Adjusting lever
NOTE: The brushroll may not rotate if the height of
the brushroll is too low against the surface of the
carpet.

Carrying handle

When carrying the appliance, push the appliance with
the caster wheels only, or carry it by holding the carry-
ing handle(s).
Fig.24
13 ENGLISH
1
C
B