Cobra MR F45-D Owner's Manual page 29

Digital Selective Calling
(DSC) Operation
Operating Your Radio
Sending A Position Request continued
Choose one of the following:
If You Receive A Position:
Receiving a Position
The requested position with the station name
and MMSI will show on your screen.
Press the Call/Set button to return to Standby mode
after you have noted the station's position.
If The Station You Called Cannot Send Its Position:
No Position Data
NO POS DATA
on your screen.
1. Press the Call/Set button to return to the
Individual Directory menu.
2. Scroll to
3. Press the Call/Set button to return to the
Call Send menu.
4. Scroll to
5. Press the Call/Set button to return to
Standby mode.
If The Station You Called Chose Not To Reply:
Resend The Request
NO REPLY
You will have two choices:
RESEND
n
EXIT
n
To Resend Your Position Request:
1. Use the Up/Down buttons to scroll to RESEND.
2. Press the Call/Set button.
To Exit The Position Request Mode:
1. Use the Up/Down buttons to scroll to EXIT.
2. Press the Call/Set button to return to the
Individual Directory menu.
3. Use the Up/Down buttons to scroll to EXIT.
4. Press the Call/Set button to return to the
Call Send menu.
5. Use the Up/Down buttons to scroll to EXIT.
6. Press the Call/Set button to return to
Standby mode.
52 English
(no position data) will show
.
EXIT
EXIT .
will show on your screen.
the request.
the Position Request mode.
Digital Selective Calling
(DSC) Operation
Operating Your Radio
Receiving A Position Request
When you went through the DSC set-up process, you set a position request reply type.
(See page 52 to change your setting.) Depending on the setting you chose, when a
Position Request message is received, your radio will enter either:
The Auto Reply mode.
n
The Manual Reply mode.
n
When The Radio Is In Auto Reply Mode:
Position Request
A position request will sound the position request
alarm and show the name of the requesting station
on the LCD. Your radio will automatically respond.
It will send your position, if you have a GPS connected
to your radio, or
NO POS DATA
if you do not have a GPS device connected.
Press any button to silence the alarm and
exit the display.
When The Radio Is In The Manual Reply Mode:
Position Request
A position request message will sound the position
request alarm and show the name of the requesting
station. You can choose to:
Reply and send your position.
n
Exit without sending your position.
Reply/Exit
n
If You Choose To Reply With Your Position:
1. Scroll to select
2. Press the Call/Set button to send your position.
3. Press any button to return to Standby mode.
If You Choose Not To Reply:
1. Scroll to select
2. Press the Call/Set button to return to Standby
mode without sending your position.
(no position data),
REPLY .
.
EXIT
Nothing Comes Close to a Cobra
®
53