Table of Contents
Advertisement
CONNECTING
EXTERNAL
VmDEO SOURCES
CONNECTING
A COMPONENT
SOURCE
TO iNPUT I OR 2: Y-PBPR,
1.
Connect the cable from the Y OUT of the Laserdisc/DVD
player or HDTV set top box to the INPUT (Y) jack, as shown on the
TV set at right.
2.
Connect the cable from the CB/P B OUT or B-Y OUT of the Laserdisc/DVD
player or HDTV set top box to the INPUT (PB) jack.
3.
Connect the cable from the CR/P R OUT or R-Y OUT of the Laserdisc/DVD
player or HDTV set top box to the INPUT (PR) jack.
4.
Connect the eab,e from the AUDIO OUT R of the Laserdise/DVD
p,ayer or HDTV set top box to the INPUT (AUDIO/R)jack.
5.
Connect the cable from the AUDIO OUT L of the Laserdisc/DVD
player or HDTV set top box to the INPUT (AUDIO/L)jack.
6.
Press the VID1 button, to view the program from the Laserdisc/DVD
player or HDTV set top box. The VDEO label
disappears automatically
after approximately
four seconds.
7.
Press the ANT button to return to the previous channel
DVDPrayer
OUTPUT
I
PR
PB
Y
L
R
@ @ @@@
A_i_ A
70
AiiiTi(i
INPUT I
:
,<:}
[
(
:/[
}
"
7!{!!{7
NOTE:
1. Completely insert the connection cord plugs when connecting to rear panel jacks.
The picture and sound that is
played back will be abnormal if the connection is loose.
2. See page 12 for tips on REAR PANEL CONNECTIONS.
19
Advertisement
Table of Contents
